Advertisement
SPECIFIED CONDITIONS OF USE
The mitre saw is intended for sawing solid and bonded wood,
materials similar to wood, with or without glued veneer and plastics.
The product is intended to be used only by adult operators who have
read the instruction manual and understand the risks and hazards.
The product is designed to be fixed at the base to a solid bench top
or a dedicated work stand. If the base is not securely fixed, the whole
machine may move during cutting operations, which increases the
possibility of serious personal injury.
The product is designed to make bevel and mitre cuts. The capacities
for the various cuts are provided in the sliding compact mitre saw
product specifications in this manual.
The product is to be used in dry conditions, with excellent ambient
lighting and adequate ventilation.
The product is intended for consumer use and should only be used as
described above and is not intended for any other purpose.
MAINTENANCE
Do not modify the product in any way or use accessories not
approved by the manufacturer. Your safety and that of others may
be compromised.
Do not use the product if any switches, guards or other functions
does not work as intended. Return to an authorised service centre for
professional repair or adjustment.
Do not make any adjustments while the saw blade is in motion.
Always make sure the power plug has been removed from the mains
power source before making adjustments, lubricating or when doing
any maintenance on the product.
Before and after each use, check the product for damage or broken
parts. Keep the product in top working condition by immediately
replacing parts with spares approved by the manufacturer.
The blade is very hot after use. Wear gloves or allow the blade to cool
before maintenance or cleaning procedures.
Clean out accumulated dust using a brush or vacuum cleaner. Do not
use compressed air.
To assure safety and reliability, all repairs, including changing brushes
should be performed by an authorised service centre.
Clean tool and guarding system with a dry cloth.
The ventilation slots of the product must be kept clear at all times.
If the power supply cord is damaged, it must be replaced only by the
manufacturer or by an authorised service centre to prevent damage
to the saw or avoid risk of electrocution.
Use only AEG accessories and spare parts. Should components need
to be replaced which have not been described, please contact one of
our AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label and
order the drawing at your local service agents or directly at:
Techtronic Industries Australia Pty Ltd
PO Box 1065
Mount Waverley VIC 3149
Tel. no. 1300 234 797
Australia
30
Techtronic Industries N.Z. Limited
PO Box 12-806
Penrose AUCKLAND 1642
Tel. no. 0800 234 797
New Zealand
30
Advertisement
