Page 2
Arming The Alarm System Away Arming AWAY To arm your system, press and hold the “AWAY” function button for 3 seconds. Your alarm will start the exit delay timer. In some cases, you will be prompted to enter your user code to confirm.
Page 3
Silence Keypad Beeping Press *, 2 then #. If the keypad continues to beep, you must continue the sequence until you are able to contact Intelligent Home for assistance. Trouble Condition When there is an error with the alarm system, press *, 2 to display a description of the current...
Page 4
Simple Functions 2 Bypass a Zone SCROLL TO TO EXIT ZONE Press *, 1 then use the right arrow to scroll to the zone you want to bypass and press * and the letter “B” will appear in bottom right corner, press # to exit, then arm your system. Clear Bypassed Zone/s Press * then 1.
Page 5
Simple Functions 3 Change Screen Brightness ENTER CODE CHANGE BRIGHTNESS Press *, 6. Enter your user code, use the left arrow to scroll back to brightness by pressing the arrow key 5 times. Press * to enter the “BRIGHTNESS” section, then use the left or right arrow to change brightness up or down.
Page 6
You should also change your alarm backup battery every 3-5 years to maintain a functioning, efficient alarm system. To book an Alarm Service, please call the Intelligent Home service department for a booking on 6363 8744. Hours: Monday 8am–4pm...
Need help?
Do you have a question about the DSC NEO Power Series and is the answer not in the manual?
Questions and answers