Technical Data - Husqvarna T540i XP Workshop Manual

7.1 Technical data

Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, liter/cm
Weight
Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg
Water protection level
IPX4
1
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
2
Sound levels
Equivalent sound pressure level at the operator's ear, dB(A)
3
Vibration levels
2
Front handle m/s
2
Rear handle m/s
Equivalent vibration levels
2
Front handle m/s
2
Rear handle m/s
Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s
Radio frequency data for
Frequency band, GHz
1
Noise emissions in the environment measured as sound power (L
2000/14/EC.
2
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for dif-
ferent sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
3
Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
length and recommended chain type. If the machine is fitted with a different bar length, the vibration level may
vary by max ± 1.5 m/s
4
Equivalent vibration level is measured and calculated as for combustion engine powered chainsaws. These fig-
ures are quoted to be able to compare vibration data regardless of type of engine according to ISO 22867:2011.
1204 - 001 - 03.12.2019
7 Technical data
2
dB(A)
WA
4
2
. Declared vibration data from measurements when the machine is fitted with a bar
2
.
BLDC (brushless) 36V
savE
Adjustable
0.18/180
2.6
Yes
101
103
92
2.6
2.6
2.2
2.1
12-16/30-40
11-15/28-38
Spur/6 or 7
24 (18)
2.4-2.4835
) in conformity with EC directive
WA
Technical data - 25