Read Timing Operation Selection (Pr. 305) - Mitsubishi Electric 700 Series Instruction Manual

5.2.3

Read timing operation selection (Pr. 305)

Parameter
Number
305 Read timing operation selection
Pr. 305 Setting Filter
0 (initial value) Without
1 Without
10 With
(1) When "0 or 10" is set in Pr. 305
Digital signal input
(terminal X0 to X15)
Set frequency
Name
The set frequency data entered from the digital signal input terminals (X0 to X15) is
always imported independently of whether the DY signal is on or off.
The set frequency data entered from the digital signal input terminals (X0 to X15) is
imported only when the DY signal is on.
The set frequency data is not imported when the DY signal is off.
Therefore, even if the input status of the X0-X15 signal changes, the set frequency
data before off of the DY signal is valid.
The set frequency data entered from the digital signal input terminals (X0 to X15) is
always imported independently of whether the DY signal is on or off.
The time lag when digital signals change can be compensated with a filter.
Filter (Pr. 305 = "10")
20ms or more necessary*
Reflected on
the set frequency
20ms maximum
Initial
Setting Range
Value
0, 1, 10 0
Description
* Hold the digital signal input (X0 to
X15) status for 20ms or more.
Changing the signal within 20ms
may not reflect it on the set frequency.
PARAMETERS
29
5