Wiring Of Inverter - Mitsubishi Electric 700 Series Instruction Manual

3.3.2

Wiring of inverter

(1) When wiring the FR-E700 series, if a hook of the front cover for the plug-in option impedes wiring, cut
off the hook and perform wiring.
REMARKS
When the option protective cover or option small cover is not fitted or wire is not passed through even if
•
the hook of the front cover of the plug-in option has been cut off, the protective structure (JEM1030)
changes to open type (IP00).
When wiring, take care not to subject the cable to stress.
After wiring, wire offcuts must not be left in the inverter. They may cause a fault, failure or
malfunction.
INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
Cut off with a
nipper, etc.
CAUTION
Cut off a hook at the bottom
of the option cover.
(Cut off so that no portion is left.)
3
19