Labels attached to the base cover may contain important regulatory information. If you need to replace the
back cover, carefully peel off the labels and apply them to the replacement cover.
Label description
GML label
FCC/IC ID label
CNC ID label
ICASA label
Israel label
Anatel label
Note: Depending on the country/region where the computer is purchased, the back cover may include one
or more of the above listed labels. For the laser etched label, print the label and apply it to the replacement
cover according to the label location illustrated above. The artworks for the laser etched labels are country/
region specific and can be found in Appendix B. Artworks for laser etched labels.
52
Hardware Maintenance Manual
Applied country/region
All
USA/Canada/Taiwan
Argentina
South Africa
Israel
Brazil
Label dimensions
16.077 mm x 22.501 mm
32 mm x 10 mm
68 mm x 6 mm
20 mm x 10 mm
32 mm x 10 mm
16.5 mm x 15 mm