Go to
https://support.lenovo.com/partslookup
replacement part:
LCD module
Remove the thermal module (with fans)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the five screws and remove the thermal module.
Figure 14. Remove the thermal module
Screw specifications
M2 x L2.5
to look up the Lenovo part numbers of the following
Number of screws
5
.
Chapter 4
Removing a FRU or CRU
35