Basic Playback (Dvd); Preparation - Toshiba MW20FN3/R Owner's Manual

Basic playback (DVD)

Preparation

The following pages describe the setup/operation in DVD mode.
DVD
Preparation
VCD
CD
1
Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
If the AC cord plug is plugged in for
the first time, wait for about 5
seconds before pressing POWER.
2
Press POWER on the unit or on the remote
control to turn on the unit.
•
The POWER indicator will light.
POWER
•
Every time you press POWER, the
unit starts from TV mode.
• When using an amplifier, switch on
POWER
the amplifier.
3
Press DVD to select DVD mode.
DVD
The DVD startup screen will appear
on the screen.
Notes:
• When connecting to other equipment, unplug the unit from the
AC outlet.
• If the unit does not operate properly: Static electricity, etc.,
may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
welcome
3
2
49