Ec Declaration Of Conformity - Husqvarna K6500 II Operator's Manual

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel: +46–36–146500, declares under sole responsibility that the power
cutter Husqvarna K6500 II (in combination only with Husqvarna high frequency power pack) dating from 2016´s serial
numbers and onward (the year is clearly stated on the type plate, followed by the serial number), complies with the
requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of February 26, 2014 "relating to electrical equipment designed for use within certain voltage limits" 2014/35/EU.
• of June 8, 2011 on the "restriction of use of certain hazardous substances" 2011/65/EU.
The following standards have been applied: EN ISO 12100:2010, EN55014-1:2006+A1:2009, EN 55014-
2:1997+A1:2002+A2:2008, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008, EN 61000-4-2,-3,-4,-5,-6,-11,
EN 60745-1:2009+C1:2010, EN 60745-2-22:2011+A11:2013.
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
in accordance with the machinery directive (2006/42/EC) on behalf of Husqvarna AB. The certificate has the number:
SEC/15/2428 - K6500
Gothenburg, 13 March 2016
Global R & D Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
English – 25