Use - Haier HTF-540DGG7 User Manual

EN
Before first use the Ice and Water or Automatic
Ice function
Before first use, you need to flush water through the
filter to remove impurities or trapped air in the water
tank and filter system.
For Ice and Water
• Press the water dispenser pad to dispense 4L of wa-
ter - wait for 4 minutes before dispensing again.
• Dispense 4L of water and then wait for another 4
minutes - There may be carbon residue dispensed
together with water. This is not harmful and normal
during the flushing process.
• Dispense another 4 L of water. - This prevents
excessive dripping of water from your dispenser.
• There may be a few drips of water coming out of
the dispenser for a few days after installation. This
is to clear the remaining trapped air in the dispen-
ser.
• Ensure your refrigerator has cooled for at least 2
hours before use.
For Automatic Ice model
1 Press control panel button „C" to turn on the ice ma-
ker function.
2 Discard the first full bin of ice made. Clean the ice
box with water and install it back. Your ice maker is
now ready for use.
3 Repeat step 2 to remove dust in the ice tray collec-
ted during manufacture and transport.
4 Empty the water, dry the bin and return it correctly.
5 Once your Ice maker is turned on the first bin of ice
may be discoloured. This is not harmful and normal
during the flushing process. Discard the first full bin
of ice made. Your Ice maker is now ready for use.
Notice
The performance of your water filter will increase with use, reaching optimum perfor-
mance after two to three full bins of ice.

Use

13