Call Forward Remote Destination Change - Toshiba Strata DK User Manual

When forwarding to an outside destination include the CO line (or CO line
group) access code before the telephone number,
See Table 11 on Page 108
access code "9" cannot be used.
2. Press
...or the [PDN]/
[PhDN] +
To cancel a Call Forward–External
Press
...or [PDN] +

Call Forward Remote Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Call into the DK
system over a CO
Line programmed for
the DISA feature.
2. Press
your [PDN] after you
receive dial tone.
3. Enter the Remote
Call Forward-
External security
code.
Strata DK Electronic Telephone 5/00
for CO Line/Line Group access codes. The LCR
Incoming calls forward to the destination stored at
Station Speed Dial Location 49.
.
+ .
You hear ringback tone signal, then internal dial tone
for 10 seconds.
Try again if you hear busy tone.
Note
then dial You hear a confirmation tone.
If a number is not dialed, the system automatically
makes the DISA CO Line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned
to your telephone in system programming.
See the System Administrator for DISA
telephone numbers.
Features
Call Forwarding
31