Adm; Buttons And Leds - Toshiba STRATA CIX DKT User Manual

ADM/DSS Console

ADM

ADM
Digital add-on Modules (DADM) can be connected to 3000-, IPT, and 2000-series
telephones to provide additional buttons. Certain models are not interchangeable.
The DADM3120 works with the DKT3000-series telephones and the IPT1020-SD.
The DADM3020 works with 3000-series telephones only and the DKT2000-series
telephone requires a 2000-series DADM.
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks
similar and has the same functions.
The IP add-on Module (IADM) offers all the same features of the DADM3120.
IADM2020 works with the IPT2000-series IP telephones.

Buttons and LEDs

The DADM3120 and DADM3020 essentially look and operate the same way, each
providing 20 feature buttons to their respective telephones. These flexible feature
buttons can be assigned as CO line, Directory Number, DSS, One Touch Speed Dial or
any other flexible feature.
Up to two DADMs can be attached to a telephone to
provide 40 buttons to supplement the telephone's 10
or 20 buttons.
Each DSS button and
provides a status of the outside line or station
assigned to it. The DSS button acts like a speed dial
button to a specific extension.
• A station or line shows steady red when in use by
others; green when in use by the DADM.
• A DSS LED will flash red while making a call
and turn intermittently green once connected.
• An outside Line LED is green when the outside
line is in use by the DADM console user. It is red
if it is in use by another telephone user.
Button numbers in the figure to the right are
Note
examples only.
120
Line
button has an LED that
209 219
208 218
207 217
206 216
205 215
204 214
203 213
202 212
201 211
200 210
First ADM
Strata CIX and CTX IPT/DKT Telephone
229 239
228 238
227 237
226 236
225 235
224 234
223 233
222 232
221 231
220 230
Second ADM
08/05