Voluntary Account Codes (Verified/Non-Verified) - Toshiba DKT3000/2000 User Manual

Advanced Operation
Account Code Calls

Voluntary Account Codes (Verified/Non-Verified)

Voluntary Account Codes are optional. They can be entered during a call and are used
for tracking selected calls using Station Message Detail Report (SMDR) call detail
recording option.
If the system is set for Verified Account Codes, station users must enter a specific
code when entering the Voluntary Account Code(s) or the code is not validated for the
SMDR call report. This does not affect the call.
There are two ways to dial using a Voluntary Account Code:
➤
To dial using the Account Code button
1. After accessing a CO line, press the
prompt you to "ENTER ACCOUNT CODE NOW."
2. Enter the account code digits. The LCD prompt disappears upon entry of the first
account code digit. After the account code is entered, the time indicator is restored
in the LCD.
3. If your station is set for Verified Account Codes, you hear confirmation tone when
the code is valid. If the code is invalid, you hear two short tones.
4. Enter the Account Code. Your conversation is not interrupted.
➤
To enter an Account Code using access codes
It's a good idea to warn the other party that you will be disconnected
Note
momentarily when you enter the access code. Once the code is entered, you will
be connected again.
1. After accessing a CO line, press
interrupted; you and the other party cannot hear each other. You will hear feature
dial tone.
2. Dial
3. Enter the account code digits. The prompt disappears upon entry of the first
account code digit. After the account code is entered, the connection is restored
and the LCD shows the time.
24
. LCD telephones prompt you to "ENTER ACCOUNT CODE NOW."
button. LCD telephones
. Once you press
Strata CTX DKT3000/2000-Series Telephone 05/02
, your call is