Which Outgoing/Incoming Call Features Do I Have - Toshiba CIX User Manual

Strata cix and ctx ipt/dkt telephone
Hide thumbs Also See for CIX:
Table of Contents

Advertisement

The Basics
Important - Read First

Which Outgoing/Incoming Call Features Do I Have?

Check mark here which outgoing/incoming features you have on your system.
Automatic Line Selection (ALS): When making outgoing calls, you have ALS if
when you lift the handset or press
Emitting Diode (LED) lights steady green. The LCD displays the station number
and the seized outside line.
Ringing Line Preference: You answer an incoming line ringing your station by
lifting the handset or pressing
to answer.
Tone First Signaling: Internal incoming call – you hear successive ring tones,
then lift the handset or press
Note
Check with your System Administrator to see if you are set with Tone First
Signaling. If you do, you can press
Voice First Signaling: Internal incoming call – your telephone does not ring;
instead you hear a long tone, then the caller's voice. Talk in the direction of your
telephone, or answer the call as you normally would by lifting the handset or
pressing
Note
Check with your System Administrator to see if you have the ability to change
between Tone and Voice Signaling on a call-by-call basis. If you do, you can
press
Hot Dialing: If your telephone is programmed for "hot dialing," you do not have
to press
calls. When you dial a number, the speakerphone automatically turns on and the
Spkr and Mic LEDs light.
14
Spkr
.
1
after dialing an internal telephone number to change the signaling.
Spkr
or lift the handset before dialing internal or external speakerphone
Spkr
you hear dial tone and the Line Light
Spkr
. You do not have to press an extension button
Spkr
to answer the call.
2
to change to Voice First signaling.
Strata CIX and CTX IPT/DKT Telephone
03/05

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents