Control Terminal; Separately Sold Product - Toshiba TLP-T50M Owner's Manual

CONTROL terminal

Pin assignment
Pin No.
1
1 2
2
4
3
3 4
5
5
6
6
8
7
7
8
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h) No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
(ACK or NAK) before sending the next command.
Main Commands
Item Command
Power on PON
Power off POF
OSD display on MO0
OSD display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Note
• Contact your dealer for control cable and other commands.

Separately Sold Product

Replacement Lamp Model TLPLV1
Note
• Design, specifications, etc. subject to change without notice for improvements, etc.
Signal Name Description
RXD Receiving data
CTS
Consent to send
DSR Data set ready
GND Signal ground
RTS Request to send
N.C No connection
TXD Sending data
N.C No connection
1 bit
Item Command
Computer input select IN1
Y/P /P input select IN2
B R
Video input select IN5
S-video input select IN6
38 39