Table of Contents
Advertisement
Using the menu (Continued)
The image adjustment menu
Use this menu to adjust image-related items.
Items Items that can be adjusted are marked with "Yes", and those that cannot are marked
with "No".
Item
Description
Contrast
Lower
Brightness
Darker
Color
Lighter
Tint
[Note 1]
Reddish
Sharpness
Softer
R-level
Less red
G-level
Less green
B-level
Less blue
Up/down shift
[Note 2]
Shift down
Notes
1: Tint can only be adjusted when Video mode
2: Up/down shift can only be adjusted when Screen size
The default setting menu
This menu shows placement status and other settings.
Item
Projection
Set projection mode in accordance with Placement Style
mode
(Placed
on floor)
No signal
Set the time to wait after signal input stops until turning off the power:
power off
Off (not turned off)
Power on
Set whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual
Lamp power
[Note 1]
Set the lamp power
Note
1: When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets
quieter. This setting will be cleared when you turn the power off. The setting will be back to
"Standard" when the power is turned on next time.
Notes
• Note that if Power on is set to Auto, then if the power cord is plugged in when power is
restored after a power outage, the projector power will come on.
• Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.
Unplugging the power cord to cut off the power will shorten the life of the lamp.
Computer Y/P
/P
Video
B
R
Higher
Yes
Yes
Yes
Brighter
Yes
Yes
Yes
Deeper
No
Yes
Yes
Greenish
No
No
Yes
Sharper
No
Yes
Yes
More red
Yes
Yes
Yes
More green
Yes
Yes
Yes
More blue
Yes
Yes
Yes
Shift up
No
Yes
Yes
p.23
is NTSC or NTSC4.43.
p.29
is Wide.
Description
p.17
(Hung from
(Back hung
(Rear)
ceiling)
from ceiling)
1 min
2 min
...
60 min
Standard
Low
28
The display setting menu
Use this menu to set screen display-related items.
Item
Screen size
S-video
Yes
Yes
Language
Yes
Yes
Yes
Yes
Background
Yes
Icon
Yes
Start-up screen
Yes
Note
• If "Thru" is selected for screen size, portions exceeding the pixel count of the LCD panel
p.35
will not appear on the screen. Note that for RGB signals with clock speeds
SXGA3_60
p.36
when the screen is enlarged using the Resize function
speed is higher than this, the RGB pixel signal is thinned before sampling.
Reset menu
This menu is displayed when other menus are not displayed, and the
down until the menu appears.
• When the screen is placed vertically, and Auto keystone correction is executed, but
the keystone correction is not successful, stow the foot adjuster in its original position,
place the projector on a flat surface, select Horizontal reference value reset, and press
the
button.
Auto
• Select Reset All and press the
Item
Horizontal reference
value reset
Reset all
Description
(Full): Display with LCD panel's resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
Select one of the languages below to use for displaying menus and messages
[
: Enter setting mode]
[
:Selection]
English/Français/Deutsch/Italiano/Español/
Português/
/
/
Screen to display when there is no input signal
Display icons as function guides
Display start-up screen when power turned on
or lower, all input pixel signals are sampled. (This effect is noticeable
p.36
(Special menu)
button to return all menu items to the factory settings.
Description
Reset the horizontal reference value for Auto keystone correction
[
: Enter execution mode]
[Yes
Reset all menu items to their factory settings
[
: Enter execution mode]
[Yes
29
/P
)
B
R
[Apply:
]
/
(Logo)
(Blue)
(None)
On
Off
On
Off
). However, if the clock
button is held
No]
[Apply:
]
No]
[Apply:
]
Hide quick links:
Advertisement
Table of Contents
