Installing the applications
Please read this chapter if the model you purchased includes a PC card slot.
If you will use the supplied wireless LAN PC card function, install the application on the
supplied CD-ROM onto your computer.
I System Requirements
Supported OSs: Windows
Pentium III 750 MHz or higher recommended
256 MB or more recommended
Screen area (resolution): 1024 by 768 pixels recommended
I Application Types and Major Functions
This application is used for wireless connections. Use it to send the images from the
computer's screen to your projector, and display on the screen.
Projector Configuration Tool
Use to modify wireless LAN and TCP/IP settings.
JPEG Conversion Tool
Use to convert JPEG and other files into a format that can be displayed as a slide show
using a memory PC card.
I How to install
In the supplied CD-ROM, select the Applications folder, and run setup.exe. Follow the
instructions on your computer screen.
If you are using Windows
XP or Windows
appear with the following message: has not passed Windows Logo to verify its
compability with Windows XP (2000). Click "Continue Anyway", and continue with the
When installation is finished, the following shortcuts will appear on your computer's
Wireless Utility →
Projector Configuration Tool →
JPEG Conversion Tool →
I How to uninstall
Select [Start Menu] → [Settings] → [Control Panel] → [Add/Remove Programs],
and remove Toshiba Data Projector from currently installed programs.
2000, during installation a dialog box may
Turning the power on and off
Connecting the power cord
Insert the power cord connector into the AC IN socket of the projector.
Insert the power cord plug into a wall or other power outlet.
When the power cord is plugged in, the following three
green indicators will come on for several seconds: ON,
TEMP, and LAMP. Next, the ON indicator will change to
orange, indicating standby mode.
(Do not perform any operations while the 3 green
(Supplied) Power cord connector
indicators are lit.)
Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
I Turning the power on
Press the ON/STANDBY
The power turns on, and the
following 3 green indicators light:
ON, LAMP, and FAN. After a
moment, the start-up screen
• Do not look into the lens during operation. Doing so could damage your vision.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal
• Do not place your hands, face, or other objects near the air exhaust. Doing so could
cause burns, deform/break the object.
• The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu
• The first time you use the projector after purchase, after the start-up screen disappears,
the Language menu is displayed
MENU / ENTER
AUTO SET FREEZE