Sony FDR-AX43 Help Manual page 267

Help Guide
Digital 4K Video Camera Recorder
FDR-AX43/AX45/AX60
On moisture condensation
If this product is brought directly from a cold place to a warm place, moisture may condense inside this product. This
may cause a malfunction to this product.
If moisture condensation occurs
Leave this product for about 1 hour without turning it on.
Where moisture condensation frequently occurs
Moisture may condense when you bring this product from a cold place into a warm place (or vice versa) or when you use
this product in a humid place as follows:
You bring this product from a ski slope into a place warmed up by a heating device.
You bring this product from an air conditioned car or room into a hot place outside.
You use this product after a squall or a rain.
You use this product in a hot and humid place.
How to prevent moisture condensation
When you bring this product from a cold place into a warm place, put this product in a plastic bag and seal it tightly.
Remove the bag when the air temperature inside the plastic bag has reached the surrounding temperature (after about 1
hour).
4-734-284-21(1) Copyright 2020 Sony Corporation
267