Connect VGA cable Plug in the power cables for projector and laptop Connect one end of the VGA cable to the of the data projector Connect other end of VGA cable to blue the laptop port video port of...
Page 3
Turn on Equipment Completely boot up the laptop. No password needed Push the rocker switch on the back of the projector Push the standby/on button on the projector...
Page 4
If no image displays … Continue pushing the input button on the data projector until RGB displays on the screen Push the key and the LCD/CRT key on the laptop simultaneously. Wait a moment. If you get an image on the screen but no image on the laptop, repeat the process...
Page 5
Focus & Shut down Focus the projector using the focus knob on front of the projector Push the Standby/On button to shut down the data projector. Wait for fan to stop before unplugging power cord...