Printer Function - Toshiba e-STUDIO161 Operator's Manual

Operating conditions
Noise level
Emission concentration
(measured according to
RAL-UZ62)
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and
other operating conditions.

Printer Function

Print speed
Resolution
Memory
Emulation
Interface
Interface cables
As a part of our policy of continuous improvement, TOSHIBA reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Sound Power Level LwA(1B=10dB)
Copying: 6.2[B]
Standby: 3.1[B]
Sound Pressure Level LpA (bystander positions)
Copying: 48[dB(A)]
Standby: 16[dB(A)]
Sound Pressure Level LpA (operator position)
Copying: 50[dB(A)]
Standby: 18[dB(A)]
Noise emission measurement in accordance with ISO 7779.
3
Ozone: 0.02 mg/m or less
3
Dust: 0.075 mg/m or less
3
Styrene: 0.07 mg/m or less
12 ppm
600 dpi
16 MB
GDI
IEEE1284 parallel connector/
USB connector (USB1.1)
[Parallel cable]
Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet))
Please purchase a commercially available parallel cable.
[USB cable]
Shielded twisted pair cable (max. length 3 m (10 feet))
Please purchase a commercially available USB cable.
APPENDIX
8
61