Inserting The Optional Pcmcia Cards - Toshiba TEC B-SX4T-QQ Owner's Manual

2. PRINTER SETUP
2.9 Inserting the Optional
PCMCIA Cards
CAUTION!
1. To protect PC cards,
discharge static
electricity from your body
by touching the metal
cabinet of the printer
before touching the card.
2. Before inserting or
removing a PCMCIA
card make sure that the
printer's power is turned
off.
3. Be sure to protect
PCMCIA Cards when not
in use by putting them
into their protective
covers.
4. Do not subject the card
to any shocks or
excessive force nor
expose the card to
extremes in temperature
or humidity.
5. The card may be
inserted into the slot
halfway even in the
wrong orientation.
However, the slot is
safety designed so that
the card will not seat
against the connector
pins.
NOTE:
Reading a read-only-type flash
memory is possible if it has been
used on the TOSHIBA TEC
printer, such as B-472 and B-572.
When the optional PCMCIA Interface Board is installed into the printer,
there will be two PCMCIA slots available as shown in the figure below.
This allows the use of Flash Memory type Cards or I/O Cards such as
LAN Cards. The following paragraphs outline how to insert PCMCIA
cards.
1. Make sure that the printer's Power Switch is in the OFF position.
2. Hold the PCMCIA Card so that the side with the model name faces
left. Insert the card into the proper slot until the Eject Button pops
out.
Model Name
Printed Side
3. Slightly pull and fold the Eject Button upward.
4. The following PCMCIA cards can be used.
Type Maker
San Disk,
ATA Card
Hitachi
LAN Card 3 COM
Maxell
Maxell
Centennial
Technologies INC.
INTEL
Simple
Flash Memory TECNOLOGY
Card (4 MB) Mitsubishi
PC Card KING
MAX
Centennial
Technologies Inc.
PC Card
Mitsubishi
Flash Memory Maxell
Card (1 MB)
Mitsubishi
E2-12
ENGLISH VERSION EO1-33034

2.9 Inserting the Optional PCMCIA Cards

Eject Button
Slot 1:
(Memory type cards only)
Slot 2:
(I/O type cards such as
LAN cards)
Eject Button
Description
A card conforming to the
PC card ATA standard
Install into the slot (2)
only. (This card
3CCE589ET Series
installed into the slot
(1) will not work.)
CC
EF-4M-TB
DC
EF-4M-TB
FL04M-15-11119-03
IMC004FLSA
STI-FL/4A
MF84M1-G7DAT01
FJN-004M6C
FL04M-20-11138-67
FJP-004M6R
MF84M1-GMCAV01
EF-1M-TB AA
MF81M1-GBDAT01
Remarks
----------
Read/Write
Read (See NOTE.)