On Line Operation; Operation Panel - Toshiba B-SA4TP SERIES Owner's Manual

3. ON LINE OPERATION

3. ON LINE OPERATION

3.1 Operation Panel

NOTES:
1. Flashes only when the Ribbon
Near End Detection function is
selected.
2. Use the [RESTART] key to
resume printing after a pause,
or after clearing an error.
This chapter describes usage of the keys on the Operation Panel in On
Line mode.
When the printer is in On Line mode and connected to a host computer,
the normal operation of printing images on labels or tags can be
accomplished.
The figure below illustrates the Operation Panel and key functions.
ON LINE LED
(Green)
[FEED] key
The LCD Message Display shows messages in alphanumeric characters
and symbols to indicate the printer's current status. Up to 32 characters
can be displayed on two lines.
There are two LEDs on the Operation Panel.
LED Illuminates when...
ON LINE The printer is ready to
print.
ERROR Any error occurs with
the printer.
There are three keys on the operation panel.
PAUSE Used to stop printing temporarily.
RESTART Used to restart printing.
FEED Used to feed media.
E3- 1
ENGLISH VERSION EO1-33048
3.1 Operation Panel
LCD Message
Display
ERROR LED
(Red)
[PAUSE] key
[RESTART] key
Flashes when...
The printer is
communicating with
your computer.
The ribbon is nearly
over. (See NOTE 1.)