Threshold Setting - Toshiba B-SA4TP SERIES Owner's Manual

Toshiba thermal printer owner's manual
Hide thumbs Also See for B-SA4TP SERIES:
Table of Contents

Advertisement

2.PRINTER SETUP

2.11 Threshold Setting

ONLINE
B-SA4T
V1.0
PAUSE
B-SA4T
V1.0
TRANSMISSIVE
B-SA4T
V1.0
F
To maintain a constant print position the printer uses the media sensor to
detect a print start position according to the difference of voltage between
a print area and a gap or black mark. When the media is pre-printed, the
darker (or more dense) inks can interfere with this process causing paper
jam errors.
To get around this problem, first, try an automatic threshold setting.
If the problem still occurs, then, the threshold voltage needs to be
manually set.
Automatic threshold setting procedure
1. Turn the power ON. The printer is in online mode.
2. Load a pre-printed media roll.
When using a label stock, move the Feed Gap Sensor so that it is in
line with the centre of the label.
When using a tag stock, move the Black Mark Sensor so that it is in
line with the centre of a black mark.
P
3. Press the [PAUSE] key.
4. The printer enters the pause mode.
P
5. Press and hold the [PAUSE] key in the pause state until the following
screen appears.
6. The sensor type is displayed.
E2-59
ENGLISH VERSION EO1-33048
2.11 Threshold Setting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents