Toshiba B-SA4TP SERIES Owner's Manual page 66

2. PRINTER SETUP
2.10 Position and Print
Tone Fine
Adjustment (Cont.)
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –0.1mm change, up to
–50.0 mm.
Pressing the [RESTART] key one
time causes a +0.1mm change, up
to +50.0 mm .
• Example of Cut Position Fine Adjustment
When setting +3.0 mm
Compared with "+0.0mm" position, the cut position
is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with "+0.0mm" position, the cut position
is shifted backward.
Cut/Strip Position Fine Adjustment
[RESTART]
[FEED]
After selecting a fine adjustment value, press the [PAUSE] key.
Feed Direction
Feed Direction
Feed Direction
E2-53
ENGLISH VERSION EO1-33048
2.10 Position and Print Tone Fine Adjustment
<3>ADJUST SET
CUT ADJ. +10.0mm
CUT ADJ.+50.0mm
CUT ADJ.+49.9mm
CUT ADJ.+0.1mm
CUT ADJ.+0.0mm
CUT ADJ.-0.1mm
CUT ADJ.-49.9mm
CUT ADJ.-50.0mm
Cut Position
3mm
Cut Position
3mm
Cut Position