Toshiba B-SA4TP SERIES Owner's Manual page 45

2. PRINTER SETUP
Windows 95/98/Me
(1) Select "Settings" – "Printers" from the "Start" menu to open the printer folder.
(2) Double-click on the "Add Printer" icon. The Add Printer Wizard runs. Click on the [Next] button.
(3) Select "Local printer", then click on the [Next] button. The screen listing "Manufacturers and
Printers" is displayed.
(4) Click on the [Have Disk...] button.
Specify the "\driver\WinMe-9x" folder in the CD-ROM drive, then click on the [OK] button.
NOTE:
The latest printer driver is available from the web site, "the Barcode Master".
(http://barcode.toshibatec.co.jp/Eng/index.html)
(5) Select the printer to be installed from "Printers" list, then click on the [Next] button.
(6) The screen to select the existing installed printer driver or use the new one, is displayed. Select
"Replace existing driver", then click on the [Next] button. If you install the printer driver for the first
time, this screen is not displayed.
(7) Select the port to be used for printing from the "Available ports" list, then click on the [Next] button.
(8) Change the printer name if necessary, and select whether or not you use the printer as the default
printer ("Yes" or "No"). Click on the [Finish] button.
(9) The printer driver is installed. When installation is completed, the new printer icon is added in the
"Printers" folder.
The "Install From Disk" dialog box is displayed.
E2-32
ENGLISH VERSION EO1-33048
2.8 Installing the Printer Drivers