Toshiba B-SA4TP SERIES Owner's Manual page 21

2. PRINTER SETUP
2.3 Loading the Media
(Cont.)
WARNING!
Be careful that your fingers,
jewellery, clothing, etc., are not
draw into the rollers of the Strip
Unit.
12. There are three issue modes available on this printer. How to set the
media for each mode is provided below.
Batch mode
In the batch mode, the media is continuously printed and fed until the
number of labels/tags specified in the issue command have been printed.
(1) Pull the top edge of the media past the Platen.
(2) Close the Top Cover until it clicks.
Strip mode (Option)
When the optional Strip Module is fitted, a label is automatically
removed from the backing paper at the Strip Plate as each label is printed.
(1) Open the Front Cover holding its right side.
Front Cover
E2- 8
ENGLISH VERSION EO1-33048
2.3 Loading the Media
Strip Unit