How To Load The Linerless Label Roll - Toshiba B-415 Owner's Manual

7. LOADING THE LABEL
8. Push down the media cover until the two cover release catches click back into the lock position.
NOTE: If the media cover is open and unlocked, an error will result and the printing will not be
performed.
9. When printing in strip issue mode, pull out the top of the liner of the label roll to eliminate slack.
[How to remove the liner backed label roll]
1. Open the media cover.
2. Fully raise up the release lever, slide the paper guide (R) to the right, and then remove the liner
backed label roll.

7.2 How to Load the Linerless Label Roll

1. Open the media cover.
2. To remove the strip module from the media cover, press the claws provided for the strip module.
"Click"
Strip Module
"Click"
E7-3
ENGLISH VERSION EO1-33014
7.2 How to Load the Linerless Label Roll
Fig. 7-6
Fig. 7-7