Windows Logon Via Fingerprint Authentication; Fingerprint System Boot Authentication - Toshiba SATELLITE L310 User Manual

7. In case of finger injury or authentication failure, it is recommended that
another fingerprint also be enrolled. The following message will be
displayed: [We recommended enrolling at least two
fingerprint images.] Click OK and repeat steps 3, 4, 5 and 6 with
another finger.

Windows logon via fingerprint authentication

In place of the usual Windows logon by ID and password, fingerprint
authentication also allows logon to Windows.
This is useful especially when many users are using the PCs, as user
selection can be skipped.
Fingerprint authentication procedure
1. Start up the computer.
2. The Logon Authorization screen is displayed. Choose any of the
enrolled fingers and swipe the fingerprint on the sensor.
If authentication is successful, the user will be logged on to Windows.
■
If the fingerprint authentication fails, please logon using the Windows
logon password.
■
Please logon using the Windows logon password if the fingerprint
authentication failed for five times. To logon using the Windows logon
password, enter the Windows logon password at the [Welcome] screen
as normal.
■
A warning message will be displayed when authentication is abnormal
or authentication is not successful within a fixed duration.

Fingerprint system boot authentication

General
The fingerprint authentication system can be used to replace the keyboard
based User Password authentication system when booting up.
If you do not want to use the fingerprint authentication system for password
authentication when booting up, but prefer to use the keyboard-based
system instead, press the BACK SPACE key when the Fingerprint System
Bootjuhu Authentication screen is displayed. This will switch the password
input screen to the keyboard-based one.
User's Manual
Operating Basics
4-7