CD
•
CD-DA
•
CD+(E)G
•
CD-MIDI
•
CD-TEXT
•
CD-ROM
•
CD-ROM-XA
•
CD-I Bridge (Photo-CD, Video CD)
•
CD-I
•
Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)
•
CD-R (Read)
•
CD-RW (Read)
Front Panel
Load disc using tray.
Loading Tray
When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it
Busy Indicator
attempts to locate the disc. One of the following will occur:
Eject
The Eject button is used to open the disc tray so you can install or remove a disc.
Button
The emergency eject hole is to be used only when the Loading Tray will not open when
Emergency
Eject button is pressed.
Eject Hole
Figure 1.SD-M1502 DVD-ROM Drive Front Panel
•
BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.
•
BUSY light flashes slowly. The disc may be dirty.
•
BUSY light remains ON. The DVD-ROM is accessing data.
•
BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error