5. BEFORE FIRST USE
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
5.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast,
the display brightness and the time of
1. Use the shuttle to set the values.
For the best results with the function:
Auto Cooking, you must calibrate the
appliance. The calibration time is 4
Fast Heat Up Indicator
Heat + Hold
The appliance calculates the time for
The display shows the temperature in
The function is active. It decreases the
heat up time.
The display shows that the automatic
weight system is active or that weight
can be changed.
The function is active.
If you use manual cooking
only, you can ignore this
• The temperature in the kitchen must
be below 35 °C.
• Install the appliance in its permanent
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
1. Activate the appliance.
2. Select the menu: Basic Settings and
3. Select the function: Calibration and
When you calibrate for the
first time, to start the
procedure you can set the
category from the control
panel or select the function
from the main menu: Auto
Make sure that the
appliance is cool before you