Your Computer's Tft Display; Inserting A Pc Card - Toshiba SATELLITE M45 Resource Manual

2 Pull the clips away from the memory module.
The memory module pops partially out of the slot.
3 Carefully remove the memory module from the slot.
4 Replace the memory module slot cover and the screw.
5 Turn the computer over and restart it.

Your computer's TFT display

Small bright dots may appear on your screen display when
you turn on your PC. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology. Over a
period of time, and depending on the usage of the computer,
the brightness of the screen will deteriorate. This is also an
intrinsic characteristic of the screen technology. When the
computer is operated on battery power, the screen will dim
and you may not be able to increase the brightness of the
screen while on battery power.

Inserting a PC Card

Sample inserting a PC Card
1 If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see "Hot swapping" on
page 36.
2 Hold the PC Card with the arrow or main label side up
and the connector side toward the PC Card slot.
Use caution when lifting or turning your computer. Failure to do so
may result in damage to components, such as cables, attached to
your computer, or to the computer itself.
Your computer's TFT display
35