Toshiba Satellite 1130 Series User Manual page 11

Toshiba notebook computer user's guide
Hide thumbs Also See for Satellite 1130 Series:
Table of Contents

Advertisement

For both antennas, the radiated output power of the TOSHIBA Wireless
LAN Mini PCI Card is far below the FCC radio frequency exposure limits.
Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in
such a manner that the potential for human contact during normal operation
is minimized. In normal operating configuration, the LCD in the upright
position, the distance between the antenna and the user should not be less
than 20cm. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Antenna(s) used in 5.15-5.25GHz frequency band must be integral antenna
which provide no access to the end user.
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.
Relevant transmitters include FCC IDs: CJ6UPA3233WL,
CJ6UPA3232BT.
The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada's website www.hc-sc.gc.ca/rpb.
Caution: Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range. FCC requires this product to be used indoors
for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device.
Taiwan
Article 14 Unless approved, for any model accredited low power radio
Article 17 Any use of low power radio frequency electric machinery shall
The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.
frequency electric machinery, any company, trader or user
shall not change the frequency, increase the power or change
the features and functions of the original design.
not affect the aviation safety and interfere with legal
communications. In event that any interference is found, the
use of such electric machinery shall be stopped immediately,
and reusing of such products can be resumed until no interfer-
ence occurs after improvement.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents