Advertisement
Quick Links
Commissioning
• Place product over the mounted base and secure
in place by refitting the four allen screws set aside
earlier. Ensure cable is not trapped (Fig. 5).
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Fitting/replacing bulbs
• The LEDs in this product are non replaceable.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
www.saxbylighting.com
Instruction leaflet
Fig. 5
Islay Floor Light
68784, 68785
Iss.1 23022016
Saxby Lighting Ltd. BH23 3PE
Advertisement
Related Manuals for Saxby Lighting Islay 68784
Summary of Contents for Saxby Lighting Islay 68784
- Page 1 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Safety information For your safety, always switch off the supply before changing lightbulbs, or cleaning. Iss.1 23022016 www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE...
- Page 2 Installation (if used as spike light) Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and Fig. 1 satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set Warning of wires.
Need help?
Do you have a question about the Islay 68784 and is the answer not in the manual?
Questions and answers