Table of Contents
Advertisement
xp CDR820/00 eng.-1
30-08-2001 11:18
Internal recording
Recording a program
High speed recording and automatic finalizing
(optional) of the current program
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Select and store all desired tracks in the CD changer
memory (see "Programming track numbers").
3
Press COMPILE CD to enter into the record mode.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total playing time of the program
and
Note: If no program is available and you press COMPILE CD,
you enter immediately into the program menu. Start
programming and return to the record mode by pressing
PROGRAM or COMPILE CD.
4
Press either:
NO to change the program.
program starts blinking. Now you can change the program
(see "Programming") and return to the record mode by
pressing COMPILE CD.
or
YES to confirm recording.
is displayed.
5
Press either:
YES, if the CDR(W) is to be finalized after recording,
or
NO, if the CDR(W) is not to be finalized after recording.
The arrow lights,
RECORD IN PROGRESS
recording and finalize (if selected) start and the actual
recording time left starts to count down.
Do not forget to finalize!
20
Pagina 20
are displayed.
is shown, high speed
Further recording possibilities
Recording of an entire disc, a track, a program or
an A-B edit without automatic finalizing
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Select the required disc by pressing CD1, CD2 or CD3.
3
Press RECORD to enter the recording mode.
Rotate the ¡ EASY JOG ™ control to select one of the
4
following normal record options:
If CD changer is selected:
: for recording an entire disc.
Continue with step 5.
0
: for recording a single track.
Press YES to confirm.
0
Rotate the ¡ EASY JOG ™ control to select the
0
required track.
is displayed.
Continue with step 6.
0
If a program is available:
: for recording a program.
If an A-B edit is available (see "A-B Editing"):
: for recording an A-B track.
5
Press SPEED several times to select the required recording
speed: 1x (normal speed; for listening during recording), 2x
(double speed) or 4x (4 times normal speed).
6
Press YES to confirm your selection.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total recording time of the CD, track
or program and
7
Press YES to start recording.
Pilen lyser,
RECORD IN PROGRESS
normal hastighed starter, og den aktuelle, resterende
optagetid begynder på nedtællingen.
Do not forget to finalize!
are displayed.
vises, optagelse med
Advertisement
Table of Contents
