Install Your Phone; Welcome Mode; Install Battery; Charge Battery - Philips SE7451B/51 User Manual

The power adaptor and telephone line cord have
to be connected correctly, as incorrect
connection could damage the unit.
Always use the telephone line cord supplied with
the unit. Otherwise, you may not get a dial tone.

3.2 Install your phone

Before using the handset, the batteries have to be
installed and fully charged.

3.2.1 Install battery

Warning
Always use AAA rechargeable batteries supplied
with your unit. There could be risk of battery
leakage if you use alkaline batteries or other
battery types.
1
Slide out the battery cover.
2
Place the batteries in the correct polarity as
indicated and replace the cover.

3.2.2 Charge battery

Warning
The handset must be charged for at least 24
hours before using it for the first time.
When the battery level becomes low, an empty
battery icon is displayed on the screen.
If the battery level becomes exceedingly low, the
phone automatically switches off and any function
in progress will not be saved.
Getting started
1
Place the handset on the charging cradle of the
base station. A melody is emitted if the handset is
placed correctly.
2
The battery icon
during charge.
3
The battery icon
handset is fully charged.
Note
Optimal battery life is reached after 3 cycles of
complete charging (over 15 hours) and
discharging, allowing approximately 12 hours of
talk-time and 150 hours of stand-by time.

3.3 Welcome mode

Note
Depending on your country, the
screen may not appear. In this case, you are not
required to select your country/operator/
language settings.
Warning
You cannot make outgoing calls or receive
incoming calls without first defining your country
selection.
Before you first use your handset, you need to
configure it according to the country of use.
After charging it for a few minutes, the word
appears in various languages. Follow
WELCOME
these steps to configure your phone:
:
1
Scroll to the word
preferred language and press
confirm your selection.
:
2
Scroll to your country.
m
3
Press SELECT to confirm your selection.
:
4
Press to your operator (if necessary).
m
5
Press SELECT again to confirm your
selection.
• The default line settings and menu language
for the selected country will be automatically
configured.
• To set date/time, see "Set Date and Time" on
page 24.
Your phone is now ready for use.
on the display blinks
becomes steady when the
WELCOME
in your
WELCOME
m
SELECT to
11