Fcc Information - Philips SJA9191/17 User Manual

EN

FCC Information

the first incoming call. They will be reset with
each new call. You cannot change the time or
date manually.
FCC Part 68 and
ACTA Information
Your Caller ID unit has been registered with the
Federal Communications Commission (FCC),
and it complies with the standards set forth in
part 68 of the FCC rules. The FCC requires that
we provide the following information.
Connection And Use:
The FCC requires you to use a modular tele-
phone jack. This equipment may not be used
with party line service or coin-operated tele-
phone lines.
Notification Of The Telephone Company
The FCC requires that upon request of your
local telephone company you provide the fol-
lowing information: the line to which you will
connect the Caller ID unit (your phone num-
ber), the Caller ID units FCC registration num-
ber and ringer equivalence number (REN)
(located on the back of your Caller ID unit),
and the USOC jack required (USOC RJ-11C or
RJ-11W). (note: the REN is useful in determin-
23