Environment And Safety; Safety Information; Power Requirements; Battery Requirements - Philips SE4502B/17 User Manual

Philips cordless telephone se4502b
Hide thumbs Also See for SE4502B/17:
Table of Contents

Advertisement

the discharged battery(ies). (Applies
to products employing more than
one separately replaceable primary
battery.)
8
When inserting battery(ies) into
this product, the proper polarity or
direction must be observed.
Reverse insertion of battery(ies) can
cause charging, and that may result
in leakage or explosion.
9
Remove battery(ies) from this
product if storing over 30 days
because the battery(ies) could leak
and damage the product.
10 Discard "dead" battery(ies) as soon
as possible since "dead" batteries
are more likely to leak in a product.
11 Do not store this product, or the
battery(ies) provided with or
identified for use with this product,
in high temperature areas.
Batteries that are stored in a freezer
or refrigerator for the purpose of
extending shelf life should be
protected from condensation during
storage and defrosting. Batteries
should be stabilized at room
temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies)
only in accordance with the
instructions and limitation specified
in the User Manual.
SAVE THESE INSTRUCTIONS
6
2
Environment and
safety
2.1

Safety information

This telephone is not designed for
making emergency telephone calls when
the power fails. An alternative should be
made available for access to emergency
calling.
2.2

Power requirements

This product requires an electrical supply
of 120 volts, single phase alternating
current, excluding IT installations defined
in standard UL 60950.
2.3

Battery requirements

The handset requires power source of
two rechargeable NiMH batteries, size
AAA 1.2V 600mAh (Hr11/45). IF THE
INCORRECT TYPE OF BATTERIES ARE
USED,A WARNING MESSAGE WILL BE
DISPLAYED.
Use only Philips Multi-Life 600mAh
rechargeable NimH batteries.
For servicing or replacement, you can
purchase a suitable headset through
service centre or retail shop.
2.4

Telephone connection

The voltage on the network is classified
as TNV- 3 (Telecommunication Network
Voltages, as defined in the standard UL

Environment and safety

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se4502bSe450

Table of Contents