Download  Print this page

Connection Ident-Key Ik3-Evaluation Unit 023312.10 - Honeywell MB-Secure 1000 Installation Instructions Manual

Hide thumbs


Connection IDENT-KEY IK3-evaluation unit 023312.17
Connector ST14 is no real output. The connector is a free soldering terminal and can be used, for
instance, to tap U_ext. Here, the control panel must supply U_ext at the customer's premises.
You can find detailed information on the connection of individual components to the evaluation unit in
the Mounting and Connection Instructions "IDENT-KEY IK3-evaluation unit 023312.10".
To operate an IDENT-KEY IK3-evaluation unit with the MB-Secure control panel, the evaluation unit
must be mandatory at software version V12 or higher.
Operating mode "Centralized Authorization " (number of IDENT-KEY ID data carriers >1024)
When "Centralized Authorization " mode is used, software version V13 or higher is mandatory for the
BUS-2 user IDENT-KEY IK3 evaluation unit.
Installation Instructions MB-Secure 1000/2000/3000/4000/5000/6000



  Related Manuals for Honeywell MB-Secure 1000