Clock/Timer; Clock Setting; Sleep Timer; Alarm Timer - Philips FW-R7 Manual

CLOCK/TIMER

CD REWR ITABLE COMP
STANDBY
ON
CD 1
CD 2
CD 3
FW - R7
DISPLAY

Clock setting

Manual clock setting
1 Press y STANDBY ON as often as necessary on the unit to
switch the unit to standby.
2 Press CLOCK/TIMER on the unit.
3 Rotate JOG CONTROL to select the clock.
is displayed and X starts blinking.
y
4 Press YES to confirm the selection.
The day of the week digit blinks.
y
5 Rotate JOG CONTROL to set the day.
6 Use ! SEARCH or ⁄ SEARCH on the unit to move
from day of the week to hour.
7 Rotate JOG CONTROL to set the hour.
8 Repeat steps 6 and 7 to set the minutes.
9 Press YES to confirm the settings.
28
ATIBLE • 3 CD CHAN GER
ANA LOG
DIG ITAL /
AU X
TU NE R
OR
iR SE NS
ER
K/ TIM
CL OC
XT
CD TE
E MIN I HIF I SYS TEM
CD REC ORD ABL
LO SE
OP EN /C
You can select different timer functions which will be activated
at a chosen time. Make sure the clock is set before using one
of these features.

Sleep timer

You can set a certain period of time before the unit switches off.
1 Press SLEEP on the remote control until the desired sleeper
time is displayed.
is shown and
y
SLEEP
is displayed or,
displayed.
2 As soon as the desired time is displayed, do not press
SLEEP again.
After the chosen time has elapsed, the unit switches to
y
standby.
• To deactivate the sleep timer, press SLEEP on the remote
control until is displayed.

Alarm timer

Alarm timer setting
The unit can be used as an alarm clock, whereby the tuner,
CD recorder or CD changer starts playback automatically at a
preset time.
1 Press y STANDBY ON as often as necessary on the unit to
switch the unit to standby.
2 Press CLOCK/TIMER on the unit.
3 Rotate JOG CONTROL to select the alarm timer.
is displayed,
y
ALARM
4 Press YES to confirm the selection.
y The hour digit is blinking.
5 Rotate JOG CONTROL to set the hour.
6 Use ! SEARCH or ⁄ SEARCH on the unit to move
from hour to minutes.
7 Rotate JOG CONTROL to set the minutes.
8 Press YES to confirm the time settings.
9 Rotate JOG CONTROL to select the source you want to be
woken up with.
10 Press YES on the unit to confirm the source selection.
• To stop the alarm, press y STANDBY ON on the unit.
is
is blinking.