Features; Edit Text (On Cd Recorder Only) - Philips FW-R7 Manual

EDIT TEXT (on CD recorder only)

Storing text during stop mode
After you have recorded your CDR(W) you can enter text, e.g.
names to discs and tracks. The text will be displayed during
playback. You can enter up to 60 characters per text field.
Only use an unfinalized CDR or CDRW (finalized CDRW must
be unfinalized first).
1 If necessary, press STOP & on the unit (Ç on the remote
control) to stop playback.
2 Press CDR to select the CD recorder.
3 Press EDIT TEXT on the unit to enter the text edit menu.
is blinking,
y
CD TEXT EDIT
4 Press YES to confirm.
5 Rotate JOG CONTROL to select either:
: for editing the CD artist.
y
: for editing the CD title.
y
or ( , ,...): for editing the artist of
y
track 1 or (2, 3,...).
or ( , ,...): for editing the title of track
y
1 or (2, 3,...).
6 Press YES to confirm the selection.
7 Rotate JOG CONTROL (press the alphabet keys on the
remote control) to select a character.
8 Press YES to confirm the selection.
y The cursor moves to the next character space.
9 Repeat steps 7 and 8 for adding further characters.
10 Press EDIT TEXT to save the characters that have been
selected and to exit to the last position in the text editing
menu.
is displayed.
y
Storing text during recording
You can store and edit text even while recording a single track
or single CD, or when recording from an external source or tuner.
Editing text during finalizing is not possible. Make sure, when
using high speed recording and automatic finalizing, to enter the
text before finalizing starts, otherwise automatic finalizing will
be cancelled.
• Follow steps 3–10 of "Storing text during stop mode".
Note: Editing text is not possible when a copy protected track
is analog recorded. Editing is stopped,
is displayed and your text is saved for later editing.
Auto copied text
When an artist's name has been stored for a track, it will be
copied automatically into the next track.
• Press either:
EDIT TEXT to confirm the copied text,
or
NO to delete the copied text and enter new text.
Inserting a space
1 Press ! SEARCH or ⁄ SEARCH (à or á on the
remote control) to move to the position where the space is
to be inserted.
The position starts blinking.
y
is displayed.
2 Press YES to confirm the position of the insert character.
A space will be inserted, text will move to the right.
y
Deleting and substituting a character
1 Press ! SEARCH or ⁄ SEARCH (à or á on the
remote control) to move to the character's position to be
deleted or substituted.
The character starts blinking.
y
2 If you want to delete the character:
Press NO.
The character is deleted and the text is shifted one
y
position to the left.
If you want to substitute the character:
Rotate JOG CONTROL (press the alphabet keys on the
remote control) to select a new character.
Press YES to confirm the selection.
• To change another character, press ! SEARCH or
⁄ SEARCH (à or á on the remote control).

FEATURES

25