Programming The Disc Tracks; Checking The Programme; Clearing The Programme - Philips FWM779/22 User Manual

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
IMPORTANT!
It is only possible to program from the
current selected disc tray.
1
1
Load the desired discs on the disc trays (refer to
"Loading discs").
2
Press CD or one of the CD 1~5 buttons to
select a disc.
3
Press PROGRAM (PROG) to start
programming.
➜
starts flashing.
PROG
4
Press í or ë repeatedly to select the desired
track.
●
For MP3 disc, press à / á (ALBUM 43) and
í / ë (TITLE -+) to select the desired
album and title for programming.
5
Press PROGRAM (PROG) to store.
●
Repeat steps 4–5 to select other tracks.
➜
If you attempt to program more than 99
tracks, "PROGRAM FULL" is displayed.
6
To start program play, press É Å .
7
To stop playback or to end programming, press
Ç once.
➜
stays and the programming mode
PROG
remains active.
1
2
USB PC LINK AUX/GAME
2
4
VOL
6
7
3 5
DSC VAC WOOX LEVEL
●
Disc Operations
Notes:
– If the total playing time has reached 100
minutes or one of the programmed tracks has a
number greater than 30, "—:—" is displayed
instead of the total playing time.
– The system will exit the programming mode if
no button is pressed within 20 seconds.

Checking the programme

Stop playback and press í or ë repeatedly.
Press Ç to exit.
OR
Press É Å to start playback from the current
programmed track

Clearing the programme

Stop playback, and then press Ç to clear the
programme.
OR
Press the OPEN • CLOSE 0 button of the
disc tray.
➜ disappears and "PROGRAM CLEARED"
PROG
is displayed.
Note:
– The program will be erased if the system is
disconnected from the power supply or you switch
to another source mode.
21