Step 5: Connecting The Ac Power Cord; Step 6: Inserting Batteries Into The Remote Control; Using The Remote Control To Operate The System - Philips FWM779/22 User Manual

Connections
Step 5: Connecting the AC
power cord
"AUTO INSTALL - PRESS PLAY" may appear
on the display panel when the AC power cord is
plugged into the power outlet for the first time.
Press É Å on the main unit to store all available
radio stations (page 3 – P3) or press Ç to exit
(refer to "Tuner Operations").
Step 6: Inserting batteries into
the remote control
1
Open the battery compartment cover.
2
Insert two batteries type R06 or AA, following
the indications (+-) inside the compartment.
3
Close the cover.
Using the remote control to operate the
system
1
Aim the remote control directly at the remote
sensor (iR) on the main unit.
2
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, TUNER).
3
Then select the desired function (for example
ÉÅ , í, ë).
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed of properly.
12