Basic Operations; Switching On/Off; Switching To Active Mode; Switching To Standby Mode (View Clock) - Philips FWM70/22 User Manual

Basic Operations

Switching on/off

Switching to active mode

Press CD, TUNER, TAPE or AUX/GAME.
Switching to Eco Power standby mode
Press B.
ECO POWER button lights up.
The display screen will go blank.

Switching to standby mode (view clock)

Press and hold B.
The clock is displayed.
While in the standby mode, pressing
CLOCK•TIMER button will switch the system
to the Eco Power standby mode.
Note:
– Before switching the system to the Eco Power
standby or standby mode, make sure the
demonstration mode has been deactivated.

Demonstration mode

If the demonstration mode is active, whenever
you switch the system to the standby mode, it
will begin showing various features offered by
the system.
To activate the demonstration
In the standby mode, press and hold Ç on the
main unit until "DEMO ON" is displayed.
To deactivate the demonstration
Press and hold Ç on the main unit until
"DEMO OFF" is displayed.
14

Setting the clock

1
Press and hold CLK/TIMER (or
CLOCK•TIMER on main unit) until "SELECT
CLOCK OR TIMER" is displayed.
2
Press + (or ë on the remote control) to
change the display to "CLOCK" and press CLK/
TIMER (CLOCK•TIMER) again to confirm.
3
Press 1 / ¡ repeatedly to set the hour.
4
Press – or + (or í/ë on the remote control)
repeatedly to set the minute.
5
Press CLK/TIMER (CLOCK•TIMER) to
store the setting.
The clock will start working.
To view the clock time in any active
mode
Press CLK/TIMER (CLOCK•TIMER) once.
The clock is displayed for a few seconds.
Notes:
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 90 seconds.
– To set the clock automatically through the time
information in the RDS signal, refer to "Tuner
Operations - Setting the RDS clock".
4
2
3
1 2 5