Lowell MAT-1 Data Logger Quick Manual

MAT-1 Data Logger
Congratulations on your purchase of a MAT-1 Data
Logger from Lowell Instruments.

Package Contents

● MAT-1 Data Logger (PVC or Titanium)
● Lithium battery (installed in logger)
● microSD card (installed in logger)
● microSD-to-SD card adaptor
● USB A to micro-B cable (3ft)
● Spare O-ring (pre-lubricated)

Software

Software is required to operate the MAT-1 Data Logger. Please download a free copy of MAT Logger
Commander TM or Domino

User Guide

This logger is shipped without a user guide. Download a copy of the MAT-1 and MAT Commander User
Guide at: www.lowellinstruments.com/downloads

Specifications

For the latest specifications please see: www.lowellinstruments.com/products/mat-1-data-logger

Support

Please contact your distributor for support or see: www.lowellinstruments.com/support
Warning: This logger contains a lithium battery. Do not cut open, incinerate, heat above 85°C (185°F), or
recharge the lithium battery. The battery may explode if the logger is exposed to extreme heat or
conditions that could damage or destroy the battery case. Do not dispose of loggers or batteries in fire.
Do not expose the contents of the batteries to water. Dispose of the batteries according to local
regulations for lithium batteries.
Contact Information
Lowell Instruments, LLC
33 Cameron Rd.
North Falmouth, MA 02556
U.S.A.
Phone: 508-444-2616
Email: info@lowellinstruments.com
TM
TM at: www.lowellinstruments.com/downloads