Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks; Erasing The Programme - Philips FWM583/55 User Manual

CD/MP3-CD Operations
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press MODE on the remote control to select:
➜ "REPEAT TRACK" – to repeat playback of
the current track.
➜ "REPEAT DISC" – to repeat playback of the
current disc.
➜ "REPEAT OFF" – to stop repeat function and
playback current disc.
●
To resume normal playback, press MODE until
"REPEAT OFF" is displayed.
2
Press MODE on the remote control to select:
➜ "SHUFFLE ON" – to random playback of the
current disc.
➜ "SHUFFLE OFF" – to stop shuffle function
and playback current disc.
●
To resume normal playback, press Mode
"SHUFFLE OFF" is displayed.
➜
or is shown, except SHUFFLE OFF
REP SHUF
mode.
Note:
– During program play mode or playing an MP3
CD, it is not possible to repeat playback of the
current disc (Repeat Disc mode).

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press DISC 1/2/3 to select a disc.
3
Press PROGRAM to start programming.
➜
starts flashing.
PROG
4
Press TITLE -/+ ¡ / ™ repeatedly to select the
desired track.
●
For MP3 disc, press ALBUM -/+
TITLE -/+ ¡ / ™ to select the desired album
and title for programming.
5
Press PROGRAM to store the track.
16
6
To end programming, press STOP9 once.
➜
remains active.
➜
the total playing time are displayed.
➜
shown.
7
To start programme play, pressÉÅ.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
– If you attempt to programme more than 40
tracks, "PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the programme
● Stop playback and press TITLE -/+ ¡ / ™
repeatedly.

Erasing the programme

●
Press STOP9 once when playback is stopped
or twice during playback.
➜
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
5 6
and
stays and the programme mode
PROG
The total number of tracks programmed and
For MP3 disc, total playing time will not be
disappears and "PROGRAM CLEARED"
PROG