Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for kincrome KP701
Summary of Contents for kincrome KP701
- Page 1 15L WET & DRY SHED VAC WET & DRY SHED VAC KP701 ED3 Dec 14...
- Page 2 14. Float Safety Valve 15. Filter Basket 16. Foam Filter 17. Cloth Filter 18. Rotating Brush 19. Crevice Tool Model No: ........................KP701 Power: ...........................1250W Input: ..........................220-240V ~ 50Hz Hose Diameter: ......................32mm Tank Capacity Dry: ......................15lt Tank Capacity Liquid:....................6lt Filter Type:...
- Page 3 15L WET & DRY SHED VAC GENERAL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1) ELECTRICAL SAFETY a) Power lead plugs must match the outlet.
- Page 4 15L WET & DRY SHED VAC 4) RISK OF ELECTRIC SHOCK • Never touch the mains plug and the socket with wet hands. • Do not pull the plug from the socket by pulling on the power cord. • Check the power cord and the plug for damage before every use. If the power cord or plug is damaged, please arrange for the replacement of the cord immediately by an authorized customer service or a skilled electrician.
- Page 5 (Fig 1b) CHOOSING THE CORRECT VACUUM FILTER THE KP701 15L WET & DRY VACUUM COMES WITH TWO FILTER TYPES. Foam Filter: The foam filter (16) can only be installed when you are using the vacuum to clean up spills or when water is present where you are vacuuming. The foam filter (16) is designed to prevent water splash-back within the vacuum tank (11) from entering the motor head (12) during operation.
-
Page 6: Vacuuming Dry Materials
15L WET & DRY SHED VAC OPERATION TURNING ON/OFF THE VACUUM. WARNING! This vacuum cleaner is NOT designed to be used as a water transferring device. The vacuum is intended to clean up general spills in & around the home, shed, garage or workshop. DO NOT submerge the vacuum pipes or hoses directly into water when vacuuming. - Page 7 15L WET & DRY SHED VAC OPERATION (CONT.) VACUUMING WET MATERIALS NOTE: Always check that you have the correct filter type in your vacuum prior to commencing vacuuming. 1. Ensure that the power cord is removed from the wall socket and remove the motor head (12) from the vacuum tank (11) by releasing the tank retention clips (10) on the side of the vacuum.
- Page 8 15L WET & DRY SHED VAC STORAGE OF THE WET & DRY VACUUM WARNING!: ENSURE THE TOOL IS DISCONNECTED FROM THE POWER SUPPLY BEFORE CLEANING OR MAINTAINING THE APPLIANCE. • Always ensure that the vacuum is emptied of any debris prior to storage. •...
-
Page 9: Trouble Shooting
(12 months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement.
Need help?
Do you have a question about the KP701 and is the answer not in the manual?
Questions and answers