Audio Setup Page - Philips ADV440/12 User Manual

Audio Setup Page

Analogue Output
Digital Audio Setup
Setup Menu Options
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analogue
output socket.
{ LT/RT }
{ Stereo }
{ V SURR }
This setting is only required if you have connected the audio
output of this unit to an amplifi er/receiver using the digital
output socket.
{ Digital Output }
{ LPCM Output }
Note: LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
– The connected device can only output
stereo audio through two speakers.
– For virtual surround sound effects.
– { SPDIF Off }
Disable digital audio output. Select this
if you are using the analogue audio
sockets to connect this unit to a TV or
Stereo system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
– { 48 K }
Select this to play disc recorded at
sampling rate of 48 kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifi er/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '48 K'.
(continued)
33