Connections; Connecting To Television; Using Composite Video Jacks (Cvbs); Using Component Video Jacks (Ypbpr) - Philips DVP1013/F7 User Manual

Connections

Connecting to television

COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
A
Use the composite video cable (yellow)
to connect the DVD player's CVBS jack
to the video input jack (or labeled as A/V
In, Video In, Composite or Baseband) on
the television (cable supplied).
B
To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
A
Use the component video cables (red/
blue/green) to connect the DVD player's
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
B
To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
C
Proceed to page 19 for detailed
progressive scan setup.
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1