Advertisement
‡
6HOHFW D SUHGHÀQHG FRORU VHWWLQJ RU FXVWRPL]H D VHWWLQJ
‡
To achieve progressive scan pictures, make sure that your TV supports the progressive scan feature, and
your TV is connected to this player through the
Press .
Select
>
‡
through the
‡
: Select an audio format for sound output when this player is connected through
the
connector.
‡
: Change a volume level.
‡
: Select a preset sound effect.
‡
: Select quiet or full dynamic sound. Night mode decreases the volume of loud
sound and increases the volume of soft sound (such as speech).
‡
Night mode is only available for Dolby encoded DVD discs.
Press .
Select
>
‡
: Select an audio language for video.
‡
: Select a subtitle language for video.
‡
: Select a menu language for a video disc.
‡
DFFHVV WKH UHVWULFWLRQ RSWLRQV :KHQ WKH SDVVZRUG ÀHOG LV KLJKOLJKWHG SUHVV
input stage, press
‡
: Display or skip the content menu for VCD and SVCD.
‡
6HW RU FKDQJH D SDVVZRUG WR SOD\ D UHVWULFWHG GLVF ,QSXW ´ µ LI \RX GR QRW
have a password or if you have forgotten your password.:
‡
: Display the software version for this player.
‡
: Reset all settings to the factory default, except for the settings for
‡
If your preferred language is not available for disc language, audio or subtitle, you can select
the menu options and input 4-digit language code which can be found at the back of this user manual.
‡
The rating levels are country-dependent. To allow all discs to be played, select
12
to access the audio setup options.
: Select an audio format for sound output when this player is connected
connectors.
to access the preference setup options.
5HVWULFW DFFHVV WR GLVFV WKDW DUH HQFRGHG ZLWK UDWLQJV ,QSXW ´ µ WR
to select a digit and press
and
.
connectors.
/
to change a digit position.
to enter an
,
from
.
Advertisement
