Setting And Display Elements Of The Amplifier Card Vt-Vspa../T1 - Bosch Rexroth VT-VSPA2-1-2X Series Manual

16/40 Information on this product
REXROTH
-1 T
Zw
w1
w2
w3
w4
t
I w
t
VSPA2
J3 ramp time
0.2 to 50 sec.
0.02 to 5 sec. •
lED displays
Ready for operation (green)
Enable (yellow)
–1 External inverting
Measuring sockets
I, w, t Ready for operation (green)
⊥ Enable (yellow)
–1 External inverting
Potentiometer (some of which with lED display)
zw Zero point calibration
w1 Command value 1
w2 Command value 2
w3 Command value 3
w4 Command value 4
t Ramp time
Bosch Rexroth AG, VT-VSPA2-1-2X/V0/T., RE 30110-B/11.2012
5.2.2

Setting and display elements of the amplifier card VT-VSPA../T1

Gw+ S+ Gw- S-
J9 J8
J5
J8, J9 step level
4WRA6 and 10...2X
4WRZ...7X, 3DREP...2X
J5, J6 clock frequency
4WRA6...2X
4WRA10...2X
Universal, 4WRZ...7X
3DREP...2X
Potentiometer adjustable on the board
Gw+ Amplitude attenuator for positive command values
Gw– Amplitude attenuator for negative command values
S+ Step level for positive direction
S– Step level for negative direction
f Clock frequency output stage
The warranty expires if the sealed potentiometer is adjusted.
J10
J4
J3
f
J6
J8 J9
J5 J6
J2 ramp function
Off
On •
• = factory setting of the jumpers
= jumper closed
= jumper open
J1
J2
J7
J4 step function J1 inverting
Off Off
On • On •
J7 maximum current setting
4WRZ...7X •
3DREP...2X
4WRA...2X